Prodigit 3270 Series Operation Manual page 152

Appendix C 3270 series LAN Instruction
1. Connecting AC power and the network line to the 3270 series mainframe, connect the other
Side of the network line to the HUB.
2. Run the ETM.EXE which bellows the path of the LAN on the CDROM drive, it will show as fig
D2-1 if not , please press F5 to search again, or check the first step was succeed or not.
3. It will be shown the installation which has been searched on the screen , click it and select the
Set IP Address bellows Config ：
4. Set a useful IP Address and Subnet Mask.
3270 Series Operation Manual 143
F D2-1
IG