Table of Contents
Advertisement
5.7.2. Constant Power Discharge Test
1. Set mode is constant Power
2. Set the discharge power
3. Set the crest factor
This function is only used when testing
UPS discharge. When testing the battery
Discharge is no CF function.
4. Set the Phase Lead or lag
This function is only used when testing
UPS discharge. When testing the battery
Discharge is no Phase Lead or lag function.
3270 Series Operation Manual 125
5. Set the Phase angle
This function is only used when testing
UPS discharge. When testing the battery
Discharge is no Phase angle function.
6. Set the discharge time
7. Set the UVP Voltage
Advertisement
Table of Contents
