3270 Series System Operating Instructions (3) - Prodigit 3270 Series Operation Manual

3.4.2. Press LOCAL to exit REMOTE mode.
Recall / Store ： Recall / Store LOAD state settings.
3.4.3.
3-5.

3270 Series System Operating Instructions (3)

3.5.1. Setting system parameters
Set GPIB address, RS232 BAUD RATE, WAKE UP, Buzzer ON/OFF and Master/Slave
Control.
3.5.1.1. Set GPIB address：First Press SYSTEM key, the Left 5 digit monitor display the
"GPIb", the right upper 5 digit monitor display "Addr", the right lower 5 digit monitor
display setting GPIB address of the representative, Press UP, DOWN buttons to
adjust the GPIB address 1~30, Key and then press ENTER, 3270 series GPIB
Address value is saved, Press system key four times to leave the GPIB address
configuration State.
3.5.1.2. Set RS232 BAUD RATE：
SYSTEM key first by the second, the Left 5 digit monitor display the "RS232", the
right upper 5 digit monitor display the "baud" and right lower monitor display setting
BAUD-RATE value, Press UP, DOWN buttons to adjust the value of BAUD RATE,
Key and then press ENTER, 3270 series is saved setting BAUD RATE, press
system key three times to leave the BAUD-RATE setting state.
3270 Series Operation Manual 75