46 PRODIGIT
•
Press the PF key, and
•
Press the PF key, and
•
Press the PF key, setting range from 0.01 to 1.00, step 0.01 by rotating the Setting
knob, press the ENTER key after the completion of the setting will be automatically
stored.
- PF
3.3.22.
PF(lag) key only functions upon C.C. and C.P. mode and all LED off upon Linear
C.C., C.R. and C.V. mode.
1, 0.9, 0.8, 0.7 and 0.6 keys are used to quick change the P.F.(Crest Factor) of
C.C. and C.P. mode.
However, adjust the PF by number key or Up, Down or rotary switch to setting the
P.F. values. The range is 0 ~ -1.
0.7
key settings will be automatically saved and exit.
0.6
key settings will be automatically saved and exit.
Key and
1, 0.9, 0.8, 0.7 and 0.6
key