Prodigit 3270 Series Operation Manual page 86

Note:setting system parameters, if the input is required to use the KEYPAD ENTER
button to confirm, otherwise 3270 series will not save the changes the
settings.
Note:Pass: Automatic test mode, no NG state, is the PASS.
Fail: Automatic test mode, any test if the NG then is the FAIL.
3.5.1.5. 3270 Series Master/Slave Instructions
3270 Series "MASTER / SLAVE "Parallel function, 1 Master, 7 SLAVE, Setting
Method Press the System key to set the CONTROL MODE to select ALONE,
MASTER or SLAVE1 ~ 7, Press the ENTER key to set, when Power off Data will
Not be lost, this parameter is saved.Master will automatically detect whether there
Is Slave machine, if there is no Slave Machine will run "ALONE Mode", if the Slave
Machine will run "MASTER Mode".
Master machine measuring current and power meter is to show the total current and
Total power (Master + Slave), the voltage meter is displayed by the Master Machine,
The Slave machine voltage meter position will display "SL1" ~ "SL7".
CTRL ALONE
CTRL MASTE 3PH
CTRL MASTE bOOST
CTRL SLAVE 1
CTRL SLAVE 2
CTRL SLAVE 3
CTRL SLAVE 4
CTRL SLAVE 5
CTRL SLAVE 6
CTRL SLAVE 7
3270 Series Operation Manual 77









