Table of Contents
Advertisement
positive half-cycle or negative half-cycle load setting
Use the knob and key to adjust the CF value, or press the CF key, the Keypad
key enters 1.1 (LDNEG), the monitor displays "LDNEG "is negative half-cycle
loading, the Keypad key enters 1.0 (LDPOS),"LDPOS" for positive half-cycle
loading.
FREQ
3.3.20.
Key and
Freq key only functions upon C.C. and C.P. mode and all LED off upon Linear C.C.,
C.R. and C.V. mode. Auto, DC, 50Hz, 60Hz and 400Hz keys are used to quick
change the frequency of C.C.and C.P. mode. However, adjust the frequency by
number key or Up, Down or rotary switch to setting the frequency values. The range
is 40~440Hz.
•
Press the FREQ key, and
•
Press the FREQ key, and
Auto, DC, 50Hz, 60Hz and 400Hz
Auto
key settings will be automatically saved and exit.
DC
key settings will be automatically saved and exit.
3270 Series Operation Manual 43
key
Advertisement
Table of Contents
