Frequency Band) - Agilent Technologies 83620A Service Manual

All manuals and user guides at all-guides.com
Trigger:
Trigger Mode
Trigger After
Trigger rc
Trigger On
Trigger Of
Trigger On
Display:
Display Mode
11. Set the oscilloscope for a single sweep at the next trigger. Press
he oscilloscope should display
12. On the synthesizer, initiate a stepped sweep. Press
13. On the oscilloscope, measure the positive pulse width and note the value
.
14. Increment the trigger to 20 events and repeat steps 11 through 13.
Pulse width value
15. Increment the trigger to 45 events and repeat steps 11 through 13.
Pulse width value
16. Record the worst case value from steps 13 through 15 on the test record.
Frequency List Frequency witching Time (Across Bandswitch Points)
17. On the synthesizer, delete any entries in the frequency list menu. Press:
FREQUENCY
MENU
18. On the synthesizer, press
frequencies in the frequency list menu:
Frequency List for Synthesizers with 0.01 GHz Capability
Frequency (GHz):
6.9
2.1
1.9
13.5
20.0
26.5
1
40.0
1
Disregard if beyond your synthesizer's capability.
1
HP 8360
Events
Negative edge
Chan 1
1 events
Positive edge
Channel 1
Repetitive
waiting Trigger
.
.
List Menu Delete Menu All
5
Enter List Freq
Frequency witching Time
Stop/Single
.
.
SINGLE
5
and enter the following
Performance Tests
.
5
2-25