3. On the synthesizer, press:
First synthesizer frequency in able 2-19.
CW
5
0
POWER LEVEL
5
5
5
Leveling Point Internal
ALC
5
Leveling Mode earch
4. On the local oscillator (HP 83620A), set the center frequency to the rst
LO frequency in able 2-19. hen set:
Power Level:
RF Power:
Table 2-19. ynthesizer and LO Frequencies
Synthesizer
Frequencies (G z)
1
1.9
5.0
9.0
15.0
1
Disregard if beyond your synthesizer's capability.
he CW frequencies checked provide a minimum verication
Note
of pulse performance. If pulse performance at a dierent
frequency is important, repeat the test at that CW frequency.
5. On the pulse generator, set:
Pulse Width:
Pulse Period: 10 us (100 kHz)
Pulse Level:
Disable:
2-78 Performance Tests
Pulse Performance (Alternate)
All manuals and user guides at all-guides.com
dBm
5
(asterisk on)
(asterisk on)
10 dBm
On
LO Frequencies
Risetime Falltime
(G z)
2.4
4.5
8.5
14.5
50 ns
5V
LED off (enables pulse generator)
Level
Accuracy
HP 8360