All manuals and user guides at all-guides.com
Operation Check.
192. ry the following start and stop frequencies:
P 83620A/23A P 83622A/24A P 83630A P 83640A P 83650A
0.045 to 20
4.5 to 18
10 to 20
2 to 14.5
Compare sweeps of 0 ms and 1 s and also single sweeps at fast speed. If
a power drop of 0.5 division or greater is noted, readjust the appropriate
calibration constant.
193. If this is the last calibration constant you will be adjusting, see
\Calibration Constants" to store the calibration constants as protected
data (in EEPROM).
Related Performance Tests
Maximum Leveled Power
In Case Of Difficulty
1. See \Adjustment Help" in this procedure.
2. Verify the oscilloscope ALC board calibration. When calibrated, the voltage
on the oscilloscope is scaled to
3. Refer to the
Troubleshooting
HP 8360
tart and top Frequencies (GHz)
2 to 20
0.045 to 26.5 0.045 to 40
4.5 to 18
4.5 to 18
10 to 20
10 to 20
2 to 14.5
2 to 14.5
33 mV/dB.
manual.
Amplifier/Filter Adjustments
0.045 to 50
4.5 to
4.5 to
10 to 2
10 to 45
2 to 14.5
2 to 2
Adjustments
3-83