External Rigger Edge Selection - Agilent Technologies 83620A Service Manual

All manuals and user guides at all-guides.com
23. External Trigger Edge Selection
Description and Procedure
No test equipment is required for this procedure.
his procedure sets the external trigger to trigger on either the leading or the
trailing edge of a L signal. When the jumper (shown in Figure 3-40) is in
the POS position a sweep is triggered on the leading edge of the pulse (when
the signal changes from 0 to 5 volts). When the jumper is in the NEG position
a sweep is triggered on the trailing edge of the pulse (when the signal changes
from 5 to 0 volts).
Figure 3-40. External Trigger Edge election Location
HP 8360 Adjustments 3-123
External Trigger Edge election