All manuals and user guides at all-guides.com
6. YO Driver +10V Reference
Description and Procedure
No test equipment is required for this procedure.
As the internal DVM monitors the +10V reference, you make the adjustment.
1. urn the synthesizer on and press
. Let the instrument warm up for
PRESET
5
at least one hour.
2. Select the A13 adjustment menu. On the synthesizer, press:
Adjust Menu AssyAdj Menu A13 Adj Menu
SERVICE
5
3. Select the A13 +10V reference adjustment,
.
A13+10V Ref
4. Adjust A13R11 (see Figure 3-10) to center the \needle" on the display.
Figure 3-10. YO Driver +10V Reference Adjustment Location
5. Select
.
Done
3-24 Adjustments
HP 8360
YO Driver +10V Reference