J1 Rf Output Connector Removal (Front Panel); Removing Rf Output Connector (Front Panel) - Agilent Technologies 83620A Service Manual

All manuals and user guides at all-guides.com
7. J1 RF Output Connector Removal
Refer to Figure 7-10 for front panel output.
o avoid damaging the connector, do not disassemble the RF
CAUTION
output connector assembly. Only unscrew the connector on the
end of the cable.
1. Complete \1. Preliminary Steps" and \2. Front Panel Removal" before
continuing.
2. On the lower front frame edge, remove the two RF output screws that hold
the RF output assembly.
3. Remove the RF connector with cable W43.
Figure 7-10. Removing RF Output Connector (Front Panel)
HP 8360 Disassembly and Replacement Procedures 7-15
Front Panel