Center Frequencies And Calibration Constants - Agilent Technologies 83620A Service Manual

15. Set the synthesizer to each of the center frequencies in able 3-7. Change
the power sweep as appropriate to sweep the full ALC range. Perform an
AM bandwidth calibration and then repeat step 14 for each corresponding
calibration constant.
Table 3-7. Center Frequencies and Calibration Constants
Center Frequencies
1
Disregard if beyond your synthesizer's capability.
Related Performance Tests
Maximum Leveled Power AM Bandwidth
In Case of Difficulty
Refer to the
Troubleshooting
3-90 Adjustments
Modulator Offset and Gain
All manuals and user guides at all-guides.com
Calibration Constants
(GHz)
5.0 #316 Band 1
9.0 #317 Band 2
19.0 #318 Band 3
25.0 #319 Band 4
1
30.0 #320 Band 5
1
35.0 #321 Band 6
1
45.0 #322 Band 7
1
manual.
HP 8360