Refer to Figure 7-5.
Instruments with Option 004 do not have all the cables shown.
Note
5. Cut the tie wraps holding the cables.
6. From the A9, A10, and A11 assemblies (or the A8 assembly for instruments
with Option 002), disconnect the four coaxial cables (W6, W7, W8, and
W9) attached to the BNC connectors.
7. Disconnect the source module interface cable, W10.
8. Disconnect ribbon cables W2 and W3 from the motherboard.
Figure 7-5. Front Panel Coaxial and Ribbon Cable Locations
7-10 Disassembly and Replacement Procedures
Front Panel
All manuals and user guides at all-guides.com
HP 8360