Removing Rf Output Connector (Option 004) - Agilent Technologies 83620A Service Manual

4. J1 RF Output Connector Removal (Option 004)
Refer to Figure 7-56.
o avoid damaging the connector, do not disassemble the RF
CAUTION
output connector assembly. Only unscrew the connector on the
end of the cable.
1. Complete \1. Preliminary Steps" and \2. Front Panel Removal" before
continuing.
2. Unscrew the RF output connector plate from the rear panel.
3. Remove the RF connector with cable W43.
Figure 7-56. Removing RF Output Connector (Option 004)
7-78 Disassembly and Replacement Procedures
Motherboard
All manuals and user guides at all-guides.com
HP 8360