Operation Verification
he following procedures meet the needs of most incoming inspections
(80% verication), and provide a reasonable assurance that the instrument is
functioning properly. Do these procedures in the order given.
he operation verication form is supplied at the end of the procedure. Use
the form to record the pass/fail results of an operation verication.
1. Self-tests
1. Perform the full self-tests contained in the instrument rmware. No
additional test equipment is required. Press
he synthesizer executes a series of self-tests. When completed, the
following message is displayed if all the tests passed:
LL SELF-TESTS H VE P SSED!
2. Record
on the operation verication form and continue to the next
Pass
test, \Power Accuracy".
If the synthesizer fails one or more self-tests, a dierent message is displayed
listing the most independent test that failed and a reference to the best
entry point into the
Troubleshooting
verication form and see the
operation verication from the beginning.
2-4 Performance Tests
Operation Verification
All manuals and user guides at all-guides.com
manual. Record
Troubleshooting
elftest (Full)
SERVICE
5
on the operation
Fail
manual. After repair, repeat
.
HP 8360