3. J1 RF Output Connector Removal (Front Panel)
Refer to Figure 7-55.
o avoid damaging the connector, do not disassemble the RF
CAUTION
output connector assembly. Only unscrew the connector on the
end of the cable.
1. Complete \1. Preliminary Steps" and \2. Front Panel Removal" before
continuing.
2. On the lower front frame edge, remove the two RF output screws that hold
the RF output assembly.
3. Remove the RF connector with cable W43.
Figure 7-55. Removing RF Output Connector (Front Panel)
7-76 Disassembly and Replacement Procedures
Motherboard
All manuals and user guides at all-guides.com
HP 8360