Refer to Figure 7-58.
5. Disconnect ribbon cable W31 from the motherboard.
6. Disconnect the 8-pin line switch connector.
7. Disconnect the fan harness.
8. Cut the tie wraps holding the coaxial cables to the four BNC connectors and
the source module interface.
9. Disconnect the coaxial cables from the A7, A10, A12, and A14 assemblies
and disconnect the source module interface cable from the A19 assembly.
Figure 7-58. Rear Panel Cable Locations
7-80 Disassembly and Replacement Procedures
Motherboard
All manuals and user guides at all-guides.com
HP 8360