All manuals and user guides at all-guides.com
6. Major Assemblies Removal
Refer to Figure 7-59.
1. Complete \1. Preliminary Steps", \2. Front Panel Removal",
\7. J1 RF Output Connector Removal", and \5. Rear Panel Removal"
before continuing.
2. Remove the six screws from the regulator shield.
3. Remove the shield.
4. Cut the tie wraps holding the cables attached to the PC assemblies.
5. Disconnect all cables attached to the PC assemblies.
6. Disconnect semi-rigid cable W54 from the A6 assembly.
All cables are labeled for easy reassembly. For identication
Note
purposes, the extractors on the PC assemblies are color-coded
to indicate their assembly number.
7. Pull out all PC assemblies.
HP 8360
Disassembly and Replacement Procedures
7-81
Motherboard