Agilent Technologies 1290 Infinity II 2D-LC User Manual page 77

4 Installation
Hardware Installation
Figure 34
Number of # Connection
Capillary
A1 2 Adapter: capillary 2 to column
switching valve, (Port IN) / Adapter
column switching valve (Port OUT) to
capillary 3a
For all other capillaries / connections, please refer to
Adapters to and from the column switching valve are only necessary if a
NOTE
6-position/14-port InfinityLab Quick-Change Valve or a for example
8-position/18-port InfinityLab Quick-Change Valve is used.
2D-LC User Guide
Setup A. Recommended setup if a column switching valve (for example
6-position/14-port InfinityLab Quick-Change Valve) is used. For a InfinityLab
2-position/6-port Quick-Change Valve, adapters A1 are not necessary.
Figure 31
L x ID [mm] P/N
75x0.12mm G1316-87326
on page 73, Figure 32 on page 74, and
Description
SST Capillary 75x0.12mm,
f/m, ns 0.8 (must be
purchased separately)
Figure 33 on page 75.
77