Agilent Technologies 1290 Infinity II 2D-LC User Manual page 86

4 Installation
Hardware Installation
3 Insert the pressure release assembly to the leak tray,
orientation as shown.
to waste
to T-piece (inline with the detector)
5 Connect with the T-piece, see
Install the Valve Head and Connecting Capillaries
For instructions on how to install the valve head and connecting capillaries, see
"Replace Valve Heads (G1170A)"
2D-LC User Guide
Figure 41 on page 85.
4 Push the pressure release assembly in the correct
position.
on page 327.
86