Agilent Technologies 1290 Infinity II 2D-LC User Manual page 84

4 Installation
Hardware Installation
G
Figure 40
Number of # Connection
Capillary
1 1 Bypass capillary (OUT)
2 1 Waste line
3 1 From pressure release kit; from
1
D column,
1
D detector
4 Sample Loop (IN)
5 Sample Loop (OUT)
6 1 2
To D column
7 1
From
8 Bypass capillary (IN)
For all other capillaries / connections, see
NOTE
If the dual-loop setup has been selected in the software configuration (see
install mirror-inverted, the sample loop at port 1 and 8 and the bypass capillary at position 4 and 5.
2D-LC User Guide
Setup G. Single Heart-Cutting Configuration as Single Sample Loop Setup
2
D pump
Figure 31 on page 73,
ID x L [mm] P/N
0.12 x 105 5500-1238
self-cut x 0.7 0890-1713
0.17 x 105 5500-1240
0.12 x 500 5500-1157
5004-0036
5004-0036
0.12 x 400 5500-1251
0.17 x 280 5067-4608
0.12 x 105 5500-1238
Figure 32 on page 74, and
"Configure the 2D-LC Cluster"
Description
Capillary, ST 0.12x105 SL/SL
Tubing-flexible 0.8/1.61mm PTFE
WT (delivered with UV detector)
Capillary ST 0.17x105 SL/SL
Capillary ST 0.12x500 SL/S
180 µL Loop 2D-LC as an example
180 µL Loop 2D-LC as an example
Capillary ST 0.12x400 SL/SL
Capillary ST 0.17x280 SX/S
Capillary, ST 0.12x105 SL/SL
Figure 33 on page 75.
on page 96),
84