Agilent Technologies 1290 Infinity II 2D-LC User Manual page 110

5 2D-LC Data Acquisition in MassHunter Workstation 11
2D-LC User Interface
Further information and setting options are available in the Context Menu. For
example, you have access to module control and capillaries settings in modify.
To make the context menu visible, you have to right click in the UI. In this view,
there are several hardware-related features available like the following:
Figure 56
Control
Method
Set Error Method
Identify Device
Switch Pump On/Off
Switch solvent selection
Valve A
Switch solvent selection
Valve B
Bottle Fillings
2D-LC User Guide
Context Menu / Control Interface of the 2D-LC Cluster
Displays the pump's Control dialog box.
Displays the pump's Method Setup dialog box (only visible in OpenLab and
ChemStation).
Sets the method that is loaded if an error occurs to the method that is
currently available in the hardware.
Causes the LED on the front of the module to blink for a few seconds.
Toggles the status of the pump, on or off.
Allows you to switch the solvent inlet line for channel A from inlet line 1 to
2.
Allows you to switch the solvent inlet line for channel B from inlet line 1 to
2.
Displays the Bottle Fillings dialog box.
110