Agilent Technologies 1290 Infinity II 2D-LC User Manual page 245

9 Data Analysis
2D-LC Data Analysis/Data Evaluation for MassHunter
4 You may want to repeat with 2D-LC Cut Marker, which gives an indication
This cannot be automated because the name of the DAD trace has the cut # in it;
NOTE
thus cut #3 does not contain any data with a name of cut #2
Cut markers in
NOTE
only makes sense, if you keep the retention time of each cut in method editor
settings. Then you can verify which cut belongs to which chromatogram.
2D-LC User Guide
when each cut has been analyzed.
Figure 121 Extract Chromatograms 2DLC:Cut marker in 2D
1
D shows the time when the cut was made. Cut markers in
2
D
245