Agilent Technologies 1290 Infinity II 2D-LC User Manual page 99

4 Installation
Software Installation
Configure the Device UI
1 Define names of modules (device name).
2 It is recommended to change order of column compartments and detectors.
2D-LC User Guide
Possible options are, for example, the following:
• Sampler
• Iso Pump
1
• D Bin Pump
1
• D MCT,
2
• D MCT,
1
• D DAD,
2
• D DAD,
For an example, see Figure 46
Use the arrow.
A meaningful order is helpful for the overview of the dashboard and signal
naming (e.g. the detector further left, in qual analysis, will be named as signal
1, e.g. DAD1).
on page 100.
99