Cabletron Systems SmartSwitch 2500 Reference Manual page 95

Console Commands
Input Parameter
[Distribute]
Output Parameter
[ELAN Number]
[LECS Address]
[LES Address]
[ELAN Name]
[ELAN Type]
[MTU]
[Connection Method]
[Distribute VPI/VCI]
[Distribute Method]
[Multipoint]
[Error Logging]
[Min TD Negotiation]
Description
Establishes the nature of the control
distribute VCC. Possible values are: All or
Proxy. All establishes control distribute
VCC to all clients. Proxy establishes
control distribute VCC only to proxy
clients.
Description
Number of the ELAN.
ATM address of the LECS that serves the ELAN.
ATM address of the LES that serves the ELAN.
Name of the ELAN.
Type of the ELAN.
Maximum transfer unit for the clients joining the ELAN.
Type of connection used. (Same as the [ConnectMethod] input parameter.)
VPI/VCI values of the control direct VCC or multicast send VCC.
Whether the control distribute VCC is established for all clients or only proxy clients.
Indicates whether control distribute VCC is PMP (point-to-multipoint) or PTP
(point-to-point). Possible values are: Yes or No.
Whether or not the BUS, LECS, and LES error logs are enabled.
Whether or not minimum acceptable traffic descriptor negotiation is enabled.
Value/Field Size
All, Proxy
SmartSwitch ATM Switch Reference Manual 2-67
ELAN
Default
Proxy