Redundancyinfo - Cabletron Systems SmartSwitch 2500 Reference Manual

RedundancyInfo

RedundancyInfo
(SmartSwitch 6500 Only)
Use RedundancyInfo to set or display the location of the backup configuration file for the slave TSM/CPU module.
Typically, you would use the same backup file for the slave and master modules. If you do, you can use the
command to copy the current switch configuration to the slave backup file. If the name or location of the files
switch
is different, however, you must use
slave backup file.
If automatic TSM/CPU redundancy is activated and operational, the slave
Note
module is synchronized with current switch configuration automatically
(there is no need to administer a slave backup file).
Operators
modify, show
Parameters
Input Parameter Description
[UpdateConfig] Sets/unsets a flag to update
configuration.
[HostIP] IP address of server on which backup
configuration file resides.
[PathFileName] Full pathname of backup file.
Output Parameter
[UpdateConfig]
[HostIP]
[PathFileName]
2-260 SmartSwitch ATM Switch Reference Manual
execute redundancyconfigbackup
Description
Sets/unsets a flag to update configuration.
IP address of server on which backup configuration file resides.
Full pathname of backup file.
to copy the current switch configuration to the
Value/Field Size Default
Y (Yes), N (No) N
Dot decimal/ Last IP address used
7-15 characters
256 characters Last pathname used
backup