Mynmaddr - Cabletron Systems SmartSwitch 2500 Reference Manual

MyNMAddr

MyNMAddr
Use MyNMAddr to manage the switch through the specified IP address.
Operators
modify, show
Parameters
Parameter Description
[IPAddr] IP address of the switch.
Descriptions
Operator Parameters/Permissions
modify [IPAddress] <ipaddress>
mynmaddr
Administrator
show [IPAddress] <ipaddress>
mynmaddr
Administrator
Examples
switch_prompt # modify mynmaddr
IpAddr() : 204.95.75.186
My Nm IP-Address : 204.95.75.186
switch_prompt #
switch_prompt # show mynmaddr
My Nm IP-Address : 204.95.75.186
switch_prompt #
2-158 SmartSwitch ATM Switch Reference Manual
Value/Field Size
Dot decimal/
15 characters
Description
Sets the IP address through which the switch can be managed
by the SNMP manager. The switch comes with a default
MyNMAddr that matches its Ethernet address. However,
MyNMAddr can be changed to an IP address that corresponds
to a LANE or IP/ATM (IP over ATM) client on the switch.
This allows the switch to be managed through an ATM
interface.
Displays the current IP address through which the switch can
be managed.
Default
Registered IP address