Leselan - Cabletron Systems SmartSwitch 2500 Reference Manual

LESELAN

Use LESELAN to manage characteristics of an LES for a specified ELAN. If a BUS corresponding to the LES exists,
the characteristics of the LES should match those of the BUS.
Operators
add, delete, modify, show
Parameters
Input Parameter
[ELANNumber]
[ELANName]
[ConnectMethod]
[ELANType]
[Multipoint]
[MTU]
[ErrorLogEnable]
[MinimumTDEnable]
[LocalSegmentId]
[ForwardPeakCellRate]
[BackwardPeakCellRate]
Description
Number of the ELAN served by the LES.
Name of the ELAN to which the LES
belongs.
Type of connection used.
The data-link type used by the ELAN.
Indicates whether control distribute VCC is
PMP (point-to-multipoint) or PTP
(point-to-point).
Maximum transfer unit for the clients joining
this ELAN.
Whether or not the BUS and LES error logs
are enabled.
Whether or not minimum acceptable traffic
descriptor negotiation is enabled.
Local segment ID. (You are prompted for this
parameter only if 802.5 is specified for
ELANType.)
Minimum forward peak cell rate.
Minimum backward peak cell rate.
Value/Field Size
0-125
Up to 32 characters
PVC, SVC
802.3 (Ethernet)
802.5 (Token Ring)
Yes: VCC is PMP
No: VCC is PTP
1516, 1580, 4544, or
9234
Yes, No
Yes, No
Positive integer
Positive integer
SmartSwitch ATM Switch Reference Manual 2-133
LESELAN
Default
0
SVC
802.3
Yes
1516
No
No