Cabletron Systems SmartSwitch 2500 Reference Manual page 128

LECSELANLEC
Output Parameter
[IP Address]
[TLV Set]
Descriptions
Operator Parameters/Permissions
add [LECAddress] <clientatmaddress>
lecselanlec [MACAddress/RouteDesc]
<clientmacaddress/routedescriptor>
[ELANNumber] <elannumber>
Administrator
delete [LECAddress/MACAddress/RouteDesc]
lecselanlec <clientatm/macaddress/routedescriptor>
Administrator
modify [LECAddress/MACAddress/RouteDesc]
lecselanlec <clientatm/macaddress/routedescriptor>
[ELANNumber] <elannumber>
Administrator
show [ELANNumber] <elannumber>
lecselanlec
All
2-100 SmartSwitch ATM Switch Reference Manual
Description
IP address of the client.
TLV set associated with the client.
Description
Maps a LANE client to a preferred ELAN and
TLV set. The client must have unique IP, ATM,
and MAC address for an entry to be accepted. You
do not have to all addresses, but whatever you
specify has to be unique. The addresses must be
added before entering this command because you
cannot modify these address parameters once they
are set. If modification is needed, you must first
enter
delete lecselanlec
another LECSELANLEC by entering
lecselanlec.
Removes a LANE client entry from the LECS.
The length of the address (ATM, MAC, Route
Descriptor) that you specify determines which
LANE client entry is deleted.
Changes the LANE client information at the
LECS. You only can modify the ELAN number
with this command. The only way to change client
addresses with this command is to enter
and then enter
lecselanlec
adding the new addresses within that command.
Displays the LANE clients configured on an
existing ELAN. You can see the ATM and MAC
addresses of LANE clients by entering this
command.
, and then create
add
delete
add lecselanlec,