Cabletron Systems SmartSwitch 2500 Reference Manual page 330

Spvp
Input Parameter
[RetryLimit]
[RetryThreshold]
In the Output Parameter table below,
(detailed) command
/d
Output Parameter
[Port]
[Src VPI]
[Operation Status]
[Total Number of SPVPs]
[Target Address]
[Target VPI]
[Last Release Cause]
[Operation Status]
[Retry Interval]
[Retry Timer]
[Retry Threshold]
[Retry Failures]
[Retry Limit]
[Traffic Type (Forward)]
2-302 SmartSwitch ATM Switch Reference Manual
Description
Maximum number of SPVP retries.
Number of consecutive failed setup attempts for
a particular SPVP before the SPVPCallFailures
object is incremented.
appears next to parameters that are available only through the
</d>
( )
Description
Physical port number on the switch. (Same as the [PortNumber] input
parameter.)
VPI allocated to the SPVP source port. (Same as the [SourceVpi] input
parameter.)
Indicates operational status of the SPVP. Possible values are: Connected,
Establishment in Progress, Retries Exhausted, and Other.
Indicates the total number of SPVPs on the switch.
Destination (target) address to which the SPVP attempts to connect.
VPI allocated to the target port. (Same as the [DestinationVpi] input
parameter.)
Code that describes cause of SPVP failure (why SPVP has failed to
connect) (see Table 2-11).
Operational status of the SPVP.
Time interval between SPVP retries.
Value of the retry timer.
Number of consecutive failed setup attempts for a particular SPVP before
the SPVPCallFailures object is incremented.
Number of failed retry attempts.
Maximum number of SPVP retries.
Type of traffic in the forward (source to target) direction.
Value/Field Size
0-65535
0-65525
show spvp
Default