Bustype - Cabletron Systems SmartSwitch 2500 Reference Manual

BUStype

BUStype
Use BUStype to enable/disable intelligent BUS mode.
If intelligent BUS mode is enabled, a unicast packet sent to the BUS is forwarded
Note
only to the LANE client whose destination address is specified in the packet. If
intelligent BUS mode is not enabled, a unicast packet sent to the BUS is forwarded
to all LANE clients connected to the BUS.
Operators
modify
Parameters
This attribute has no output parameters.
Input Parameter
[IntelligentBUSMode]
Descriptions
Operator Parameters/Permissions
modify bustype [IntelligentBUSMode]
<intelligentbusmode>
Administrator
Examples
switch_prompt # modify bustype
IntelligentBUSMode(OFF)
BUS Type Set to Intelligent Mode
switch_prompt #
2-32 SmartSwitch ATM Switch Reference Manual
Description
Enables/disables intelligent BUS mode.
: on
Value/Field Size
Off, On
Description
Sets intelligent BUS mode.
Console Commands
Default
Off