Clientvc - Cabletron Systems SmartSwitch 2500 Reference Manual

ClientVC

ClientVC
Use ClientVC to display VCs associated with ARP mappings cached by LANE or IP/ATM clients on the switch.
ClientARP is similar to ClientVC but does not show the VPI/VCI corresponding to a route to a destination client.
Note Clients on the switch are called local clients.
Operator
show
Parameters
Input Parameter
[ClientNumber]
Output Parameter
[MAC Address]
[IP Address]
[VPI/VCI]
[ATM Address]
Descriptions
Operator Parameters/Permissions
[ClientNumber] <clientnumber>
show
clientvc
All
2-54 SmartSwitch ATM Switch Reference Manual
Description
Number of the local client.
Description
MAC address of the LANE destination client.
IP address of the IP/ATM destination client.
VPI/VCI values of control direct VCC or multicast Send VCC to the destination client.
ATM address of the LANE or IP/ATM destination client.
Value/Field Size
0-125 or All
Description
Displays VC details for local IP/ATM or LANE clients in
addition to client ARP mapping details. For IP/ATM, the
destination IP address appears; for LANE, the destination
MAC address appears. The destination address is what is
located at the other end of the VC.
Console Commands
Default
All