Cabletron Systems SmartSwitch 2500 Reference Manual page 356

SwitchConfig
Output Parameter
[Number of TSM Boards]
[ACTIVE CPU Model]
[ACTIVE CPU Speed]
[ACTIVE CPU Board ID]
[ACTIVE CPU Board Rev]
[ACTIVE CPU DRAM]
[ACTIVE CPU Common DRAM] Common DRAM memory size (in megabytes; up to 4 characters).
[Number of CSM Boards]
[Cell Memory Size]
[Switch Software Type]
[Software Version]
[Build Date]
[Software Image Size]
[Heap Space Used/Total/%Free]
Descriptions
Operator Parameters/Permissions
modify [SwitchName] <switchname>
switchconfig [IPAddress] <ipaddress>
[IPNetMask] <ipnetmask>
Administrator
2-328 SmartSwitch ATM Switch Reference Manual
Description
Number of TSM modules installed in the chassis.
Model of the active CPU (up to 7 characters).
Speed of the active CPU.
ID number of the active CPU board (1 character).
Revision number of the active CPU board (1 character).
DRAM memory size of the active CPU (in megabytes; up to 4 characters).
Number of CSM modules installed in the chassis.
Total cell buffer size (k cells).
Type of switch software package (server).
Version of the software (X.X).
Software build date (day/month/date/hr:min:sec year).
Binary image size (bytes).
Total heap space used, total memory allocated to heap, and percent of free
memory (bytes/bytes/%).
Description
Runs automatically when you first configure the switch,
then prompts you for the required input. Enter
switchconfig
parameters after the initial switch configuration. Unless
you are experienced with configuring IP subnets, it is
recommended that you accept the IP netmask default.
if you want to change any of the above
modify