Cabletron Systems SmartSwitch 2500 Reference Manual page 270

PVC
Input Parameter Description
[PortNumber] Port number on the switch.
[CrossConnectId] Cross-connect ID of the PVC (as
assigned by switch software). Use the
show pvc all
cross-connect IDs. Each PTP PVC has
a unique cross-connect ID. PMP
PVCs might have the same
cross-connect ID but different
cross-connect sub IDs.
[CrossConnectSubId] Cross-connect sub-ID of the PVC (as
assigned by switch software). Each
PTP PVC and PMP PVC has a unique
cross-connect sub-ID.
In the Output Parameter table below, (</d>) indicates parameters that are available only through the
(detailed) command.
Output Parameter
[Conn Id]
[Conn SubId]
[Low Port]
[Low VPCI]
[Low VCI]
[Low Type]
[High Port]
[High VPCI]
[High VCI]
2-242 SmartSwitch ATM Switch Reference Manual
command to get a list of
Description
Cross-connect ID of the PVC (as assigned by switch software).
Each PTP PVC has a unique cross-connect ID. PMP PVCs
might have the same cross-connect ID but different
cross-connect sub IDs.
Cross-connect sub-ID of the PVC. Each PTP PVC and PMP
PVC has a unique cross-connect sub-ID.
Number of the Low Port (based on lexical order).
VPCI of the Low Port.
VCI of the Low Port.
Connection type from perspective of Low Port.
Number of the High Port (based on lexical order).
VPCI of the High Port.
VCI of the High Port.
Value/Field Size
A1 to B4 (physical-2500 family),
A1.n to B4.n (virtual-2500 family),
1A1 to 8B4 (physical-6500),
1A1.n to 8B4.n (virtual-6500)
Positive integer
Positive integer
Default
No default
No default
No default
show pvc /d