Cabletron Systems SmartSwitch 2500 Reference Manual page 162

LESELAN
Input Parameter
[Distribute]
[BUSATMAddress]
Output Parameter Description
[ATM Address] ATM address of the LES on the ELAN.
[Distribute VPI/VCI] VPI/VCI values of the control direct VCC or multicast send VCC.
[Distribute Method] Indicates whether the control distribute VCC is established for all clients or for proxy
clients only.
[ELAN Type] Same as the [ELANType] input parameter.
Descriptions
Operator Parameters/Permissions
add leselan [ELANNumber] <elannumber>
[ELANName] <elanname>
[ConnectMethod]
<connectmethod>
[ELANType] <elantype>
[Multipoint]
<distributevcctype>
[MTU] <maxframesize>
[Distribute]
<controldistributevccoption>
[BUSATMAddress]
<busatmaddress>
Administrator
delete [ELANNumber] <elannumber>
leselan
Administrator
2-134 SmartSwitch ATM Switch Reference Manual
Description
Establishes nature of control distribute VCC.
Possibie values are: All or Proxy. All
establishes control distribute VCC to all
clients. Proxy establishes control distribute
VCC only to Proxy clients.
ATM address of the BUS (specify if the LES
and BUS are not co-located).
Description
Creates a specified ELAN on the LES. Each ELAN must have
both an LES and a BUS assigned to it.
Removes a specified ELAN from the LES and drops all the
clients connected to it.
Value/Field Size
All, Proxy
13-20 byte hex-based/
Up to 59 characters
Default
Proxy