Lecserrorlogcontrol - Cabletron Systems SmartSwitch 2500 Reference Manual

LECSErrorLogControl

Use LECSErrorLogControl to control the LECS error log. The LECS error log contains information on LECS
configuration request failures.
Operators
modify, show
Parameters
Input Parameter
[ErrorLogStatus]
Output Parameter
[Administrative Status]
[Operation Status]
[Log Last Entry Index]
Descriptions
Operator
modify lecserrorlogcontrol
show lecserrorlogcontrol
Description
Enables or disables the LECS error log
Description
Administrative status of the LECS error log. Possible values are: Enabled or Disabled.
(Same as the [ErrorLogStatus] input parameter.)
Operational status of the LECS error log. Possible values are: Active, Disabled, Failed,
Out-of-Resources, Other (see Table 2-6).
Index of last entry in the log. The log can contain up to 128 entries. The entries are
written in top-down order (starting with index 128, then 127, 126, 125, and so forth).
After 128 entries, no additional entries are logged until all current entries are deleted. Use
the
delete lecserrorlog
Parameters/Permissions
[ErrorLogStatus]
<errorlogstatus>
Administrator
All
Value/Field Size
Enable, Disable
command to delete all entries.
Description
Enables or disables the LECS error log.
Displays LECS error log control information.
SmartSwitch ATM Switch Reference Manual 2-109
LECSErrorLogControl
Default
No default