Spvptarget - Cabletron Systems SmartSwitch 2500 Reference Manual

SpvpTarget

(SmartSwitch 6500 Only)
Use SpvpTarget to display SPVP target information on the switch. Information is displayed only if the switch is the
destination (target) of an SPVP. The SPVP is established (added) at a source switch across the ATM network.
Operators
show
Parameters
Input Parameter
[PortNumber]
Output Parameter
[Port]
[TargetAddress]
[Vpci]
[OperStatus]
[Source NetPrefix]
Descriptions
Operator
show spvptarget
Description
Port number on the switch (number of the
SPVP target port).
Description
Port number on the switch. (Same as the [PortNumber] input parameter.)
Destination address to which the SPVP connects.
VPI allocated to the target port.
Operational status of the SPVP. Possible values are: Connected,
Establishment in Progress, Retries Exhausted, and Other.
ATM address prefix at the source port (at the switch that initiated the
SPVP).
Parameters/Permissions
[PortNumber] <portnumber>
Administrator
Value/Field Size
A1 to B4 (2500 family),
1A1 to 8B4 (6500),
or Al
Description
Displays SPVP target information on the
switch.
SmartSwitch ATM Switch Reference Manual 2-311
SpvpTarget
Default
All