Cacserviceclassbw - Cabletron Systems SmartSwitch 2500 Reference Manual

Console Commands

CACServiceClassBw

Use CACServiceClassBw to set or display the bandwidth allocated to each service category.
The following applies to SmartSwitch 6500 only: You can hot-swap TSMs.
Note
Hot-swapping is replacing a module when the chassis is powered up. If you
replace a TSM with another TSM of the same type (same I/O ports), existing
configuration of port parameters is not affected. This includes parameters set
using any of the following attributes: ATMRoute, CACServiceClassBw,
IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP, ServiceRegistry, SigTimer,
SigStatistics, SSCOPConfig, and SSCOPStatistics. If you replace a TSM with
another TSM of a different type, existing configuration of port parameters is
deleted. The deletion occurs when the new module is plugged into the chassis
backplane.
Operators
modify, show
Parameters
Input Parameter
[PortNumber]
[ServiceCategory]
[MaxBandwidthInPerCBR]
[MaxBandwidthInPercentage
RTVBR]
[MaxBandwidthInPercentage
NRTVBR]
Description
Port number on the switch.
You can specify a physical
or virtual port.
.iÀ܈ViÊV>Íi}œÀß°
>Þˆ"Ö"ÊL>˜`݈`Í...Ê
>••œV>Íi`ÊvœÀÊ+*-°Ê-0œÍ>•ÊœvÊ
>••ÊÍ...iÊÃiÀ܈ViÊV>Íi}œÀßÊ
L>˜`݈`Í...ÊÃ...œÖ•`ʘœÍÊ
iÞVii`Ê£ä䯰®
Maximum bandwidth
allocated for RTVBR.
>Þˆ"Ö"ÊL>˜`݈`Í...Ê
>••œV>Íi`ÊvœÀÊ!-07*-°
Value/Field Size
A1 to B4 (physical-2500 family),
A1.n to B4.n (virtual-2500 family),
1A1 to 8B4 (physical-6500),
1A1.n to 8B4.n (virtual-6500),
or All
CBR, UBR, RTVBR, NRTVBR, ABR UBR
Zero or positive integer
Zero or positive integer
Zero or positive integer
SmartSwitch ATM Switch Reference Manual 2-39
CACServiceClassBw
Default