Shutdown - Cabletron Systems SmartSwitch 2500 Reference Manual

Shutdown

Use Shutdown to shut down the switch to a state where it can be powered off. Shutdown stops all logging and
synchronizes the file system. You must enter
Operator
shutdown
Parameters
This attribute has no parameters. Just enter
Descriptions
Operator Parameters/Permissions
Administrator
shutdown
Example
switch_prompt # shutdown
Confirm(y/n)?: y
switch_prompt #
You can switch off the system now
before turning off the switch.
shutdown
at the switch prompt.
shutdown
Descriptions
After issuing this command, you are prompted for confirmation
(reply to confirm). After the switch is shutdown, you can
y
safely power off or reset the switch. Be sure not to confuse this
attribute with Exit. Use simply to end a console session.
exit
SmartSwitch ATM Switch Reference Manual 2-275
Shutdown