Cabletron Systems SmartSwitch 2500 Reference Manual page 171

Output Parameter
[Outgoing Control Coordinate State]
[Incoming Control Coordinate VCC]
[Outgoing Multicast Forward State]
[Incoming Multicast Forward VCC]
[Cache Synchronization VCC]
Descriptions
Operator
show leslnniinfo
Examples
switch_prompt # show leslnniinfo
ELANNumber(ALL)
LNNI Information for ELAN 0
==============================================================================
LES Configure Direct VCC
LES Control Coordinate VCC (PMP) : 0/39
BUS Multicast Forward VCC (PMP)
Neighbor Information :
Neighbor Address : 39:00:00:00:00:00:00:00:00:00:14:90:00:00:20:D4:14:90:00:02
Outgoing Control Coordinate State : Connected
Incoming Control Coordinate VCC
Outgoing Multicast Forward State
Incoming Multicast Forward VCC
Cache Synchronization VCC
switch_prompt #
Description
State of the leaf connection to that LES neighbor. Possible values are:
Inactive, Connecting, Active, or Retry Wait.
The VPI/VCI of the incoming leaf connection from that LES neighbor.
State of the leaf connection to that BUS neighbor. Possible values are:
Inactive, Connecting, Active, or Retry Wait.
The VPI/VCI of the incoming leaf connection from that BUS neighbor.
The VPI/VCI of the point-to-point connection to the neighbor for purposes
of cache synchronization.
Parameters/Permissions
[ELANNumber] <elannumber>
:
: 0/35
: 0/40
: 0/41
: Connected
: 0/42
: 0/38
Description
Displays information on VCCs related to
LES/BUS servers
SmartSwitch ATM Switch Reference Manual 2-143
LESLNNIInfo