Svcbyid - Cabletron Systems SmartSwitch 2500 Reference Manual

SVCById

SVCById
Use SVCById to display a single or all SVCs in normal or detail mode.
Operator
show
Parameters
Input Parameter
[CrossConn]
In the Output Parameter table below, (</d>) indicates parameters that are available only through the
(detailed) command
/d
Output Parameter
[Conn Id] and [Cross Connect Id]
[Low Port]
[Low VPI]
[Low VCI]
[Low Cast Type]
[High Port]
[High VPI]
[High VCI]
[High Cast Type]
[Creation Time]
[Admin Status] </d>
2-322 SmartSwitch ATM Switch Reference Manual
Description
Identifier unique for each connection.The
identifier is displayed by the
command.
Description
Identifier for each unique connection. (Same as the [CrossConn]
input parameter.)
Port receiving the backward flow of the high/low pair.
Low VPI (virtual path identifier) number.
Low VCI (virtual circuit identifier) number.
Low port connection type (PMP or PTP).
Port sending the forward flow of the high/low pair.
High VPI (virtual path identifier) number.
High VCI (virtual circuit identifier) number.
High port connection type (PMP or PTP).
Time when the SVC was established (with respect to boot time of
the switch). Displayed in Hour:Minute:Seconds format.
Administrative status (UP or DOWN).
Value/Field Size
show SVC
Default
No default
show svdbyid