Cabletron Systems SmartSwitch 2500 Reference Manual page 214

PnniNode
Output Parameter
[Rst Transit]
[Complex Rep.]
[Rst Branching]
[DB Overload]
[Ptse]
Descriptions
Operator Parameters / Permissions
add pnninode [NodeIndex] <nodeindex>
[NodeLevel] <nodelevel>
[ComplexRepresentation] <complexrepresentation>
Administrator
delete [NodeIndex] <nodeindex>
pnninode
Administrator
modify [NodeIndex] <nodeindex>
pnniNode [NodeLevel] <nodelevel>
[AtmAtmAddress] <atmaddress>
Administrator
Administrator
show pnniNode
2-186 SmartSwitch ATM Switch Reference Manual
Description
Whether or not the switch is restricted to not allowing support of SVCs transiting it.
Possible values are: True and False.
Whether or not the switch uses the complex node representation. Possible values are:
True and False. True indicates complex node representation is used. False indicates
simple node representation is used.
Whether or not the switch is able to support additional point-to-multipoint branches.
Possible values are: True and False. False indicates additional branches can be
supported. True indicates additional branches cannot be supported.
Whether or not the switch is currently operating in topology database overload state.
Possible values are: True or False.
Number of PTSEs currently in the topology database of the switch.
Description
Adds a logical node at the switch.
Deletes a logical node at the switch.
Changes a logical node at the switch.
Displays PNNI node information for
the switch.