Ds3E3Loopback - Cabletron Systems SmartSwitch 2500 Reference Manual

DS3E3LoopBack

DS3E3LoopBack
Use DS3E3LoopBack to set or display loopback at DS3 or E3 ports.
A port in loopback mode does not pass normal traffic.
Note
Operators
modify, show
Parameters
Input Parameter Description
[PortNumber] Port number on the switch.
[Loopback] Loopback mode (see Table 2-3).
Output Parameter
[Port]
[Type]
[Loopback]
Descriptions
Operator Parameters/Permissions
[Port] <port>
modify
[Loopback] <loopback>
ds3e3loopback
Administrator
show ds3e3loopback Administrator
2-64 SmartSwitch ATM Switch Reference Manual
Description
Port number on the switch.
Type of port.
Loopback mode specified (see Table 2-3).
Value/Field Size
A1 to B4 (2500 family),
1A1 to 8B4 (6500),
or All
None, Cell, Payload,
Line, Diag
Description
Sets loopback status of DS3 and E3 ports.
Displays loopback status of DS3 and E3 ports.
Console Commands
Default
All
None