Cabletron Systems SmartSwitch 2500 Reference Manual page 112

IPATMClient
Descriptions
Operator Parameters/Permissions
[ClientNumber] <clientnumber>
add
[ServerType] <servertype>
ipatmclient
[ServerAddress]
<serveraddress>
[IPAddress] <ipaddress>
[NetMask] <netmask>
[MTU] <maxtransferunit>
Administrator
[ClientNumber] <clientnumber>
modify
[ServerType] <servertype>
ipatmclient
[ServerAddress]
<serveraddress>
[IPAddress] <ipaddress>
[NetMask] <netmask>
[MTU] <maxtransferunit>
Administrator
[ClientNumber] <clientnumber>
show client
All
2-84 SmartSwitch ATM Switch Reference Manual
Description
Creates a new IP/ATM client on the switch. If the circuits in
this VLAN are SVCs, and if you want to use this client as the
ARP server, enter for the server type. If you do not
local
want to use this client as the ARP server, enter
the server type, and use the address of any configured ARP
server as the server address. If adding an IP/ATM client in a
PVC-only environment, enter
Modifies an existing local IP/ATM client on the switch.
Displays all or specified clients on the switch. Enter
to establish the activity of all the different client types
client
on the switch.
Console Commands
external
for the server type.
none
show
as