Spvprestart - Cabletron Systems SmartSwitch 2500 Reference Manual

SpvpRestart

(SmartSwitch 6500 Only)
Use SpvpRestart to restart a failed SPVP on the switch. An SPVP fails when its call setup request is rejected by the
target switch. The SPVP call request is sent from this switch (the source switch) to the target switch. SpvpRestart uses
SPVP target information provided by the last attempt to establish the SPVP (information provided as input parameters
by the Spvp attribute). If the target information was incorrect, restart the SPVP using the Spvp attribute and correct
parameter values.
Operators
modify
Parameters
This attribute has no output parameters.
Input Parameter
[PortNumber]
[SourceVpi]
Descriptions
Operator
modify spvprestart
Description
Port number on the switch.
VPI allocated to the originating port.
Parameters/Permissions
[PortNumber] <portnumber>
[SourceVpi] <sourcevpi>
Administrator
Value/Field Size
A1 to B4 (2500 family),
1A1 to 8B4 (6500),
or Al
Description
Restarts an SPVP.
SmartSwitch ATM Switch Reference Manual 2-309
SpvpRestart
Default
All