6-5. Servo System Alignment
6-5-2. S Reel FG Duty Automatic Adjustment
For explanation of SV02: S Reel FG Duty Adjust, refer to Section 6-2.
(1) Enter SV02: S Reel FG Duty Adjust.
(2) When the adjustment succeeds, message "Adjust
Complete" is displayed.
(3) If necessary, enter SV0C: SV NV-RAM Save
(Refer to Section 6-5-12).
n
It takes time to terminate the command when an SV0C
command is executed. To perform other servo adjustments
continuously, execute the SV0C command after all the
servo adjustments are completed.
6-5-3. T Reel FG Duty Automatic Adjustment
For explanation of SV03: T Reel FG Duty Adjust, refer to Section 6-2.
(1) Enter SV03: T Reel FG Duty Adjust.
(2) When the adjustment succeeds, message "Adjust
Complete" is displayed.
(3) If necessary, enter SV0C: SV NV-RAM Save
(Refer to Section 6-5-12).
n
It takes time to terminate the command when an SV0C
command is executed. To perform other servo adjustments
continuously, execute the SV0C command after all the
servo adjustments are completed.
6-194
------>SV02
Servo Adjust [Auto Adjust]
S Reel FG Duty Adjust
Adjust Complete
------>_
------>SV03
Servo Adjust [Auto Adjust]
T Reel FG Duty Adjust
Adjust Complete
------>_
GY-2120WD/WS