Tape Cleaner Replacement - Sony GY-2120WD Maintenance Manual

3-4. Drum Entrance Side Block

3-4-2. Tape Cleaner Replacement

c
Do not touch the tape cleaner with bare hands.
The tape cleaner has a sharp edge.
Outline
Replacement
1. Remove the Tape Cleaner
2. Install the Tape Cleaner
Note
Adjustment after the tape cleaner replacement is not required.
Tools
. Torque screwdriver (6 kg.cm)(JB-5251):
J-6252-510-A
. Torque screwdriver's bit (+2 mm, l=75 mm): J-6323-420-A
Preparation
1. Turn the power off.
2. Remove the upper lid. (Refer to Section 1-1-1.)
3. Remove the plate MD. (Refer to Section 1-1-1.)
4. Remove the cassette compartment. (Refer to Section 1-1-2.)
Removal
Screw (PS2 x 6)
1. Remove the Tape Cleaner
Remove the screw, then remove the tape cleaner
Tape cleaner
from the S plate assembly.
S plate assembly
Installation
2. Install the Tape Cleaner
Tighten the screw while moving the tape cleaner
clockwise.
Tightening torque: 19.6 x 10
-2 N.m (2 kgf.cm)
Remove/Install the Tape Cleaner
3-48
GY-2120WD/WS