Table of Contents
Advertisement
Removal
1. Remove the Rotary Head Cleaner
Assembly
Refer to steps 1 and 2 in Section 3-3-4.
n
To remove the fixing screws of the capstan
motor, remove the rotary head cleaner assembly.
2. Open the DR-327 Board
(1) Put the unit on its left side panel down,
remove the three screws, and open the DR-
327 board with the side panel of the unit
down.
GY-2120WD/WS
http://getMANUAL.com
Screws
(PWH3 x 6)
DR-327 board
3-6. Drum Exit Side Block
Open the DR-327 Board
3-65
Advertisement
Table of Contents
Troubleshooting
