6-1. Electrical Adjustment Overview
6-1-1. Precautions
•
Be sure to perform the respective adjustments in order shown unless otherwise instructed.
•
Do not execute adjustment item of the maintenance menu, and do not change adjustment data unless it is required.
In case if any adjustment item of the maintenance menu is changed unintentionally, do not save the data, and recover it by
turning off the power of the unit.
•
Before starting adjustment, it is recommended to make a copy of setup menu conditions.
The settings can be returned easily to its customer condition after finishing adjustment. (Refer to the Operating Instructions.)
6-1-2. Displaying the Adjustment Item
Perform the electrical alignment using the adjustment menu of the maintenance mode.
Display the adjustment item as follows.
1.
Display the maintenance menu. (Refer to "4-1-2. Activating the Maintenance Mode".)
Select "M1F: ADJUST" using the ↓ button, and press the → button.
2.
Press the → button.
3.
The adjustment item appears.
MAINTENANCE MENU
M1:SERVICE SUPPORT
M1F:ADJUST
A23:CP VR
A27:APR VR
A2F:NV-RAM CONTROL
Section 6
Electrical Alignment
89